Calvac Paving Bay Area Asphalt & Concrete

New Asphalt Parking Lot

Since 1974, Calvac Paving has taken great pride in serving Bay Area construction needs.

Consistently ensuring the highest possible quality and best results for clients means keeping pace with the latest innovations in paving technology and techniques. Calvac Paving’s dedicated and knowledgeable paving professionals have amassed considerable experience in everything from new construction to refurbishment and repair of old, worn paving such as sidewalks, parking lots, roadways and more. While many paving companies focus solely on one kind of paving, Calvac can boast extensive experience with asphalt, concrete and earthwork, from initial¬† grading to final striping. Among the services Calvac Paving offers to the public are:

  • new construction
  • grading
  • concrete placement
  • asphalt placement and compaction
  • striping
  • ASPHALT seal coating
  • pulverizing in place
  • ADA upgrades to existing structures
  • crack sealing and repair
  • petromat overlays
  • and more.


In addition to these services, Calvac Paving takes its obligations to the environment we all share very seriously. We use the latest green and eco-friendly policies and practices at every stage of construction from the project’s start to the final cleanup and disposal of waste products at the end.

“Green” Paving?

While this phrase may sound oxymoronic, asphalt pavement has consistently been reported as the most frequently recycled material in the nation since 1993. Continuous improvements in recycling technology and paving practices and techniques that permit for more adaptive uses of existing paving materials have fueled this recycling boom with regards to asphalt and, to a lesser degree, concrete. Purely virgin asphalt, also known as “hot-mix,” is relatively rare today because of the numerous advantages of recycling asphalt in place. However, many old-school pavers often still refer to “warm-mix,” discussed below, as “hot-mix” regardless of this designation’s true accuracy.

Most asphalt you see on the road today consists of rocks, also called aggregates, sand, binder material and additives such as shredded rubber tires, pig manure and metal slag, to name a few. These additives are re-purposed and treated in such a way as to make them a cohesive part of the overall mix and increase the mix’s performance. This transforms relatively useless or even outright hazardous materials into reasonably safe and effective filler materials for asphalt mixes. However, the most common fillers are recycled asphalt paving and asphalt shingles. Using these materials in “warm-mix” asphalt paving sharply decreases the amount of virgin oil binder needed to create a safe driving surface with proper internal cohesion and compactive properties.

According to the National Asphalt Paving Association, in the 2013 construction season alone nearly 68 million tons of recycled asphalt and almost 2 million tons of asphalt shingles were used as recyclables, at a savings to taxpayers of around $2 billion. The use of recyclables has increased 21% since 2009 and represents over 99% of all in situ, or existing, asphalt paving being recycled and re-purposed instead of ending up in landfills.

Calvac Paving is proud to be part of an industry that is able to recycle and reuse apparent waste materials so efficiently and effectively. Calvac Paving takes a deep interest in ongoing advances in procedures and techniques that allow for new ways to re-purpose existing pavement, whether it is asphalt, concrete or something else.

Looking To The Future

The interest in new advances is not limited to asphalt, because Calvac Paving is dedicated to finding more efficient and ecologically sound ways of achieving the same overall goals. One development that Calvac Paving is watching with great interest is so-called “bio-concrete.” In this type of concrete a regular concrete mix is impregnated with tiny plastic capsules containing a type of bacillus bacterium which feeds on calcium lactate and excretes limestone. The capsules dissolve when exposed to water, activating and freeing the dormant bacteria within to begin the healing process. This landmark technology could result in admixtures for other types of paving, increasing the strength, performance and longevity of all kinds of paving and reducing necessary time-of-life repairs dramatically.

As paving technology and techniques evolve, Calvac Paving intends to retain our leadership position in adopting new practices, prioritizing greater safety, security, durability and environmental awareness in every task we undertake. From new builds to maintenance and repair of existing paving projects, Calvac Paving wants to ensure that its products and services stand the test of time, just as we have since 1974. For your next paving project, whether you’re starting from scratch or trying to determine the most efficient and effective way to repair or replace worn, cracked or improperly placed paving materials, Calvac Paving’s experienced personnel can become stakeholders in your properties. We welcome the opportunity to show you why Calvac Paving has been building the Bay Area for over forty years, giving real results that stand the test of time!